3D Wing Effect
Shape every bat differently
Shape the wings, build your flight path and switch on the eerie glow. NightSwarm™ creates a dramatic Halloween display in minutes without bulky props or complicated setup.
Create My Bat SwarmShape every bat differently
Create a natural flight pattern
Built for after-dark impact
Easy to pack after Halloween
Arrange different sizes in a sweeping pattern and bend each pair of wings to create the look of bats flying across the wall.
The LED glow adds a second layer to the display so the swarm stands out when guests and trick or treaters arrive.
Decorate a doorway, staircase, fireplace, mirror, party wall or dry covered porch. Combine sets for a larger swarm.
Step 01
Fold along the scored lines to create different flying angles and a stronger 3D effect.
Step 02
Plan the flight path before attaching the bats to a clean, smooth and dry surface.
Step 03
Turn on the LEDs and watch the wall transform when the room gets dark.

See the real scale
Mix all three sizes for a natural, layered swarm.
Halloween setups from real homes
From hallways to staircases and covered porches, every swarm can be arranged differently.
“I put the first few around our hallway mirror and carried the rest over the doorway. It took about twenty minutes, and the kids absolutely lost it when we switched the room lights off. The mixed colours showed up much brighter than I expected.”
“I was worried the adhesive would be fiddly, but every bat stayed in place on our painted wall. I bent the wings at slightly different angles and ran them up the staircase. From the bottom step it genuinely looks like a swarm flying upstairs.”
“We used two sets around our covered front porch for trick-or-treat night. They gave the entrance a lot of impact without taking up any floor space, and several neighbours stopped to ask where we found them. Packing them away afterward was easy.”
Questions, answered plainly
Everything you need to know about coverage, setup, batteries and storage.
A 12 piece set works well around a mirror, window or doorway. Choose 24 bats for a staircase or wider wall, and 36 or more for a dramatic full wall or multi zone display. Final coverage depends on how tightly or loosely you arrange the swarm.
Yes. Each 12 piece set includes five different sizes, ranging from approximately 12.7 cm to 30.5 cm wide. Mixing the sizes helps create a more natural looking flight path with depth and movement.
Results can vary depending on the paint, surface condition and length of use. Apply the bats only to a clean, smooth and dry surface. Test one adhesive pad in a hidden area first, then remove it slowly rather than pulling it straight away from the wall.
They are best used indoors or in a dry, covered area such as a sheltered porch. Keep the bats and battery units protected from rain, direct water and excessive moisture.
Each LED unit uses replaceable LR41 button cell batteries. A fresh set provides approximately 48 hours of continuous illumination, although actual runtime may vary depending on battery quality and operating conditions.
Yes. Remove them carefully, replace the batteries when needed and store the bats flat in a clean, dry place. Fresh adhesive pads may be needed for the next installation, especially after extended use.
Halloween starts at the front door
Build a glowing flight path across your doorway, wall or staircase before Halloween night arrives.